• DB13/T 6047-2025 高温合金及耐蚀合金中硅含量检测 电感耦合等离子体原子发射光谱法 现行
    译:DB13/T 6047-2025
    【国际标准分类号(ICS)】 :77.080.01黑色金属综合 【中国标准分类号(CCS)】 :H11钢铁与铁合金分析方法
    发布单位或类别:(CN-DB13)河北省地方标准 | 发布时间: 2025-04-03 | 实施时间: 2025-05-03
  • DB51/T 3235-2024 锂电材料中磁性颗粒的测定 光学显微镜法 现行
    译:DB51/T 3235-2024 The determination of magnetic particles in lithium battery materials using optical microscopy
    适用范围:本文件规定了锂电材料中磁性颗粒的测定方法,通过采用带偏振器的光学显微镜法测定锂电材料中金属磁性颗粒数量及尺寸的原理、试剂、仪器、测试步骤、结果分析以及试验报告内容等。 本文件适用于锂盐、正极材料(含前驱体)及负极材料。其他材料也可参照使用。
    【国际标准分类号(ICS)】 :77.160粉末冶金 【中国标准分类号(CCS)】 :H16粉末冶金分析方法
    发布单位或类别:(CN-DB51)四川省地方标准 | 发布时间: 2024-12-18 | 实施时间: 2025-01-18
  • DB22/T 265-2020 铬铁中硅和磷含量的测定 酸溶、碱熔-电感耦合等离子体原子发射光谱法 现行
    译:DB22/T 265-2020 The determination of silicon and phosphorus content in chromium iron by acid dissolution and alkali fusion-inductively coupled plasma atomic emission spectroscopy
    【国际标准分类号(ICS)】 :77.100铁合金 【中国标准分类号(CCS)】 :H11钢铁与铁合金分析方法
    发布单位或类别:(CN-DB22)吉林省地方标准 | 发布时间: 2020-06-23 | 实施时间: 2020-07-10
  • DB45/T 2108-2019 铜铟镓硒太阳能光伏电池靶材中镓含量的测定  电感耦合等离子体原子发射光谱法 废止
    译:DB45/T 2108-2019 Determination of Gallium Content in Copper Indium Gallium Selenide Solar Cell Targets Using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES)
    【国际标准分类号(ICS)】 :77.120.30铜和铜合金 【中国标准分类号(CCS)】 :H13重金属及其合金分析方法
    发布单位或类别:(CN-DB45)广西壮族自治区地方标准 | 发布时间: 2019-12-25 | 实施时间: 2020-01-30
  • DB45/T 2109-2019 铜铟镓硒太阳能光伏电池靶材中硒含量的测定  容量法 废止
    译:DB45/T 2109-2019 DB45/T 2109-2019 Determination of selenium content in copper indium gallium selenide solar photovoltaic target by volumetric method
    【国际标准分类号(ICS)】 :77.120.30铜和铜合金 【中国标准分类号(CCS)】 :H13重金属及其合金分析方法
    发布单位或类别:(CN-DB45)广西壮族自治区地方标准 | 发布时间: 2019-12-25 | 实施时间: 2020-01-30
  • DB36/T 1158-2019 风化壳离子吸附型稀土矿产地质勘查规范 现行
    译:DB36/T 1158-2019 Geological exploration specifications for ion-adsorbing type rare earth minerals in weathering crusts
    【国际标准分类号(ICS)】 :77.120.99其他有色金属及其合金 【中国标准分类号(CCS)】 :H14稀有金属及其合金分析方法
    发布单位或类别:(CN-DB36)江西省地方标准 | 发布时间: 2019-11-05 | 实施时间: 2020-05-01
  • DB53/T 937-2019 铟渣中铟含量的测定  火焰原子吸收分光光度法 现行
    译:DB53/T 937-2019 Determination of In content in indium slag by flame atomic absorption spectrophotometry
    【国际标准分类号(ICS)】 :77.040.99金属材料的其他试验方法 【中国标准分类号(CCS)】 :H15贵金属及其合金分析方法
    发布单位或类别:(CN-DB53)云南省地方标准 | 发布时间: 2019-09-23 | 实施时间: 2019-12-23
  • DB34/T 3371-2019 印制电路板刚性覆铜箔层压板导
热系数测定方法 现行
    译:DB34/T 3371-2019 Printed circuit board rigid copper clad laminate thermal conductivity determination method
    适用范围:本标准规定了用平板法测定印制电路用刚性覆铜箔层压板(以下简称覆铜板)导热系数的测试原理、 试样、测定仪器、测定环境、测定步骤、结果计算和测定报告。 本标准适用于厚度不小于 1.00 mm 覆铜板导热系数的测定,也适用于厚度不小于 1.00 mm 覆铜板 光板的导热系数的测定。
    【国际标准分类号(ICS)】 :77.120.30铜和铜合金 【中国标准分类号(CCS)】 :H13重金属及其合金分析方法
    发布单位或类别:(CN-DB34)安徽省地方标准 | 发布时间: 2019-07-01 | 实施时间: 2019-09-01
  • DB37/T 3589-2019 再制造 激光熔覆层与基体结合强度试验 试样制备方法 现行
    译:DB37/T 3589-2019 Repair laser cladding layer bonding strength test sample preparation method
    【国际标准分类号(ICS)】 :77.040.01金属材料试验综合 【中国标准分类号(CCS)】 :H11钢铁与铁合金分析方法
    发布单位或类别:(CN-DB37)山东省地方标准 | 发布时间: 2019-05-29 | 实施时间: 2019-06-29
  • DB37/T 3590-2019 再制造 激光熔覆层与基体结合强度试验方法及评定 现行
    译:DB37/T 3590-2019 Testing method and evaluation of the bond strength between the recycled laser cladding layer and the substrate
    【国际标准分类号(ICS)】 :77.040.01金属材料试验综合 【中国标准分类号(CCS)】 :H11钢铁与铁合金分析方法
    发布单位或类别:(CN-DB37)山东省地方标准 | 发布时间: 2019-05-29 | 实施时间: 2019-06-29
  • DB32/T 3599-2019 增材制造 钛合金零件激光选区熔化用粉末通用技术要求 现行
    译:DB32/T 3599-2019 Additive Manufacturing—General technical requirements for selective laser melting titanium alloy powders
    适用范围:本标准规定了增材制造钛合金零件激光选区熔化用粉末的技术要求、试验方法、检验规则、标签和随行文件、包装、运输和贮存等内容。本标准适用于增材制造钛合金(TC4和TC4 ELI)零件激光选区熔化用粉末。
    【国际标准分类号(ICS)】 :77.160粉末冶金 【中国标准分类号(CCS)】 :H16粉末冶金分析方法
    发布单位或类别:(CN-DB32)江苏省地方标准 | 发布时间: 2019-04-08 | 实施时间: 2019-04-30
  • DB34/T 3320-2019 磷铜合金化学分析方法
磷含量的测定 钒钼黄
分光光度法 现行
    译:DB34/T 3320-2019 DB34/T 3320-2019 Pitch copper alloy chemical analysis method - Determination of phosphorus content - Vermiculite molybdenite colorimetric method
    适用范围:本标准规定了磷铜合金中磷含量的测定方法。 本标准适用于磷铜合金中磷的测定,测定范围 13.00%~15.00%。
    【国际标准分类号(ICS)】 :77.120.30铜和铜合金 【中国标准分类号(CCS)】 :H13重金属及其合金分析方法
    发布单位或类别:(CN-DB34)安徽省地方标准 | 发布时间: 2019-02-01 | 实施时间: 2019-03-01
  • DB13/T 2855-2018 钼铁 硅、磷和铜含量的测定 电感耦合等离子体原子发射光谱法 现行
    译:DB13/T 2855-2018 The determination of the content of iron molybdenum, silicon, phosphorus and copper using inductively coupled plasma atomic emission spectroscopy
    【国际标准分类号(ICS)】 :77.100铁合金 【中国标准分类号(CCS)】 :H11钢铁与铁合金分析方法
    发布单位或类别:(CN-DB13)河北省地方标准 | 发布时间: 2018-09-21 | 实施时间: 2018-10-21
  • DB13/T 2856-2018 铁矿石 钾、钠含量的测定 电感耦合 等离子体原子发射光谱法 现行
    译:DB13/T 2856-2018 The determination of potassium and sodium content in iron ore by inductively coupled plasma atomic emission spectroscopy
    【国际标准分类号(ICS)】 :77.100铁合金 【中国标准分类号(CCS)】 :H11钢铁与铁合金分析方法
    发布单位或类别:(CN-DB13)河北省地方标准 | 发布时间: 2018-09-21 | 实施时间: 2018-10-21
  • DB34/T 3082-2018 方解石中钙、镁、硅、铁、铝、锰、钾含量的测定 X射线荧光光谱法 现行
    译:DB34/T 3082-2018 Determination of Calcite Content: Calcium, Magnesium, Silicon, Iron, Aluminum, Manganese, Potassium by X-Ray Fluorescence Spectroscopy
    适用范围:本标准规定了X射线荧光光谱法测定方解石中钙、镁、硅、铁、铝、锰、钾含量的方法。 本标准适用于方解石中钙、镁、硅、铁、铝、锰、钾含量的测定,测定范围见表1。
    【国际标准分类号(ICS)】 :77.120.10铝和铝合金 【中国标准分类号(CCS)】 :H12轻金属及其合金分析方法
    发布单位或类别:(CN-DB34)安徽省地方标准 | 发布时间: 2018-04-16 | 实施时间: 2018-05-16
  • DB34/T 2980-2017 铝及铝合金  铬、铅、锡含量的测定 波长色散 X 射线荧光光谱法 现行
    译:DB34/T 2980-2017 Aluminum and aluminum alloys Determination of chromium, lead, and tin content by wavelength dispersive X-ray fluorescence spectroscopy
    适用范围:本标准规定了铝及铝合金中铬、铅、锡含量的波长色散X射线荧光光谱法测定方法。 本标准适用于铝及铝合金中铬、铅、锡的测定,测定范围见表1。
    【国际标准分类号(ICS)】 :77.120.10铝和铝合金 【中国标准分类号(CCS)】 :H12轻金属及其合金分析方法
    发布单位或类别:(CN-DB34)安徽省地方标准 | 发布时间: 2017-11-15 | 实施时间: 2017-12-15
  • DB34/T 2981-2017 铅及铅合金  锡、锑、砷、铋、铜、镉、钙、 银含量的测定 波长色散 X 射线荧光光谱法 现行
    译:DB34/T 2981-2017 The determination of lead and lead alloys: tin, antimony, arsenic, bismuth, copper, cadmium, calcium, and silver content: wavelength dispersive X-ray fluorescence spectroscopy
    适用范围:本标准规定了铅及铅合金中锡、锑、砷、铋、铜、镉、钙、银含量的波长色散 X 射线荧光光谱法 测定方法。 本标准适用于铅及铅合金中锡、锑、砷、铋、铜、镉、钙、银的测定,测定范围见表1。
    【国际标准分类号(ICS)】 :77.120.60铅、锌、锡及其合金 【中国标准分类号(CCS)】 :H13重金属及其合金分析方法
    发布单位或类别:(CN-DB34)安徽省地方标准 | 发布时间: 2017-11-15 | 实施时间: 2017-12-15
  • DB15/T 1243-2017 树脂中杂质含量的测定 电感耦合等离子体发射光谱法 废止
    译:DB15/T 1243-2017 Determination of impurity content in resin by inductively coupled plasma emission spectroscopy
    【国际标准分类号(ICS)】 :77.040.30金属材料化学分析 【中国标准分类号(CCS)】 :H17半金属及半导体材料分析方法
    发布单位或类别:(CN-DB15)内蒙古自治区地方标准 | 发布时间: 2017-09-10 | 实施时间: 2017-12-10
  • DB15/T 1241-2017 硅烷法生产多晶硅尾气中硅烷含量的测定 气相色谱法 废止
    译:DB15/T 1241-2017 Determination of SiH4 Concentration in Polysilicon Tailgas Produced by Silane Method Using Gas Chromatography (GC) Method
    【国际标准分类号(ICS)】 :77.040金属材料试验 【中国标准分类号(CCS)】 :H17半金属及半导体材料分析方法
    发布单位或类别:(CN-DB15)内蒙古自治区地方标准 | 发布时间: 2017-09-10 | 实施时间: 2017-12-10
  • DB15/T 1240-2017 硅粉中铁、铝、钙、钛、硼、磷含量的测定 电感耦合等离子体发射光谱法 废止
    译:DB15/T 1240-2017 Determination of Iron, Aluminum, Calcium, Titanium, Boron, and Phosphorus Content in Silica Fume by Inductively Coupled Plasma Atomic Emission Spectroscopy
    【国际标准分类号(ICS)】 :77.040.30金属材料化学分析 【中国标准分类号(CCS)】 :H17半金属及半导体材料分析方法
    发布单位或类别:(CN-DB15)内蒙古自治区地方标准 | 发布时间: 2017-09-10 | 实施时间: 2017-12-10