译：WJ/Z 228-2014 Height and depth gauges - Type and dimensions - Scaled depth gauge L0=1mm～250mm

译：WJ/T 1458-2014 The vise base and its components including round-head support screws

译：WJ/T 1443-2014 Clamp base and its components Manual bidirectional eccentric clamping clamp base

译：WJ/Z 229-2014 Depth Gauge Type and Size: D0=0.5mm～8mm, L0≤50mm

译：WJ/T 1475-2014 Clutch housing and its components, pneumatic reversing valve

译：WJ/T 1476-2014 Tool holder and its components, technical requirements

译：WJ/T 1467-2014

译：WJ/T 1460-2014

译：WJ/Z 237-2014 Height Gauge Type and Size: Height Gauge L0=30mm～250mm

译：WJ/T 1461-2014 Screwdriver base and its components, right limit block

译：WJ/T 1454-2014 The vise base and its components and parts in combination with an eccentric wheel

译：WJ/Z 230-2014 The type and dimensions of the height and depth gauges are as follows: Length gauges L0=3mm～500mm, D0=2mm～14mm, for gauges with L0≤80mm, D0=2mm～14mm, and for gauges with L0＜80mm

译：WJ/T 1466-2014 The chuck and its components, cylinder block

译：WJ/Z 236-2014

译：WJ/Z 224-2014 Height and depth gauges - Type and dimensions - Double-marked depth gauge: D0 = 3mm to 50mm, L0 = 2mm to 102mm

译：WJ/T 1469-2014 Screw base and its components and the front cover of the cylinder

译：WJ/T 1471-2014 pliers holder and its components including piston

译：WJ/T 1474-2014 Hack saw base and its parts and components, front cylinder flange

译：WJ/T 1470-2014 Clamp base and its components, seal ring

译：WJ/T 1455-2014 Pliers holder and its components, wedge plate